Pedometer on MtConnect03

There are the builtin sensors of accelerometer and gyro on MtConnect03. This tutorial will show how to simply get the value from MtConnect03.

[中文版]

This tutorial could apply to MtConnect03, MtConnect04 and MtConnect04S.

Step 1. What hardware need to  be prepared? Where to get them?

  • Motion Sensor Starter Combo
  • Environment Sensor Starter Combo

Both(spec) set are include MtConnect03 and relative accessories. Please contact us for further information.

Except MtConnect03, you also need J-Link to connect it. Follow the guide of J-Link to know more and setup the hardware.

Step 2. Firmware

⇣ Download ⇣

Follow instructions and you will know how to program MtConnect03 with “SoftDevice” and “Application” file. Then use mtconnect03_pedometer.hex which you just download, instead of the Application hex file to program MtConnect03.

Step 3. Install PedometerDemo.apk

⇣ Download ⇣

Download and install the Android application on your smartphone. When you open it, will see a name with “PEDOMETER_TEST”,  which is from the firmware just be wrote on MtConnect03. Click it, app will show the basic value what sensor measured. Voila!
Screenshot_2015-12-10-11-44-03 Screenshot_2015-12-10-11-45-02

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s