Smart Factory: Big Data and Cloud Solutions

In any smart factory systems, huge amount of real-time data are generated.  In order to efficiently and effectively analyze these data, cloud computing must be used over traditional local computing methods.  MtM+’s smart factory solution is cloud ready and this article aim to discuss this in detail.  The following diagram illustrates one particular implementation on a motion detection system.

MtM’s DCS Data Collection Station collects real-time motion (vibration) data from all the machines in operation.  This data is sent to a local server through BLE MESH network.  Traditionally, the data will be stored and analyzed locally.  In the cloud ready solution, the local server doesn’t analyze this data but instead transmit all the real time data to a cloud server over the internet.  The storage and analyze are done via a vast cloud server network.

One might ask, why go through the internet when his can be handled locally.  The following tables look at the pros and cons of both solutions.

For a smart factory, the amount of data generated is enormous.  It requires tremendous processing power to analyze this locally which requires significant investment in initial setup and continual maintenance.  Many companies see the benefits of shared computing power and have setup cloud systems to perform preciously that.  They charge a monthly or yearly fee for their cloud service which includes everything from data download to data analysis.  This is definitely a more cost effective solution for most companies.

The single most concerning issue with a cloud computing solution is security.  Any system that is online is prone to attacks from hackers which can be catastrophic.  A local system is definitely the most secure as everything is kept locally but one must weigh between cost and security.   MtM+’s current cloud solution is setup with the Alibaba Cloud (Aliyuan).  This is highly secure and is outlined in details in the following link:    The following diagram illustrates preciously MtM+’s implementation.

The vibration sensors detect real-time data where the Data Collection Stations (DCS) transmit this information to local server/gateway through either Bluetooth Low Power (BLE) or LoRa interfaces.  Once the gateway successfully collect these data on the local server, the on-premise Dashboard will display these in detail before uploading them onto the cloud server (in this case, Aliyuan is used).  Once uploaded, the information can be accessed and analyzed anywhere with an internet connection.   The following figure shows two different dashboards, the left being the local server and the right being the cloud server.

Looking at our sample case of vibration detection, the local (on-premise) server can generate status reports and display real time data. This data is also coarsely analyzed to detect abnormal activities (ie power outages). While these features are available for both local and cloud servers, local server do offer some additional services. An on-premise SQL database on the local server acts as a backup to the generated data. If needed, the DCS devices can be reprogrammed or modified locally but not through the cloud.

The cloud servers however offer very powerful computing power which would be very expensive to implement for any company. With the cloud, these big data can be analyzed effectively and efficiently with any combination of parameter matrices as shown in the following diagram.

Provided the advanced security of most available cloud service providers today, the benefits of their advance analytical tools make cloud computing a vital part of any smart factory implementation. For any question and inquiry, please email MtM+ at

Smart Factory: Thermal Image Recognition Systems

The latest development in MtM+’s Smart Factory solution is the incorporation of Thermal Image Recognition into the existing Data Collection Station (DCS).   The main targets of this new technology are factories that store their chemicals in tanks.  Whether the chemical is hazardous or not, the storage of these substances must be taken seriously.

Heat, is a particularly important matrix in terms of storing condition.  Certain chemicals when heated up will release harmful by-products that are a risk to health.  Unanticipated reaction of certain chemical might release a lot of heat and may result in explosions.  This calls for improved real-time monitor systems that can control water spray systems or inform an evacuation when necessary.  The following figure provides an overview of such systems.

Data Collection Station (DCS) is equipped with various wireless connectivity options and various I/O ports for smart factory implementation.  See Specifications here (    A DCS implemented with an IR camera generates real-time image data and transmit such data to the Cloud or the Local WAN through a LoRa network.   LoRa is a digital wireless network that is capable for long range transmissions up to 10 km in rural areas.  The DCS’s LoRa system is implemented using MtM+’s M908 module (see specification here –   With this data securely on the Cloud or the Local WAN, it can be accessed by a Personal Computer (PC) through a Wifi Access Point (AP) for further analysis.   With these data available on the PC, reactionary systems can be implemented based on the incoming data.

The IR camera selected for this project is the Radiometric Lepton 2.5 manufactured by FLIR Systems.   It features a small size of 8.5×11.7×5.6mm, 80hx60v pixel resolution, 9Hz frame rate with I2C/SPI interfaces.  The most important feature of the Lepton 2.5 is the radiometric capability compared to its predecessors.  Lepton 2.5 can output a temperature value for each pixel in a frame irrespective of the camera temperature with an accuracy of +/-5˚C.

With the 14-bit pixel temperature value (in Kelvin) successfully collected into the PC, they are divided into different blocks for analysis, see image below.

This system has been implemented and tested with a Petrochemical company to provide a real-time monitor system for the safety of their chemical storage (see images below).

Press Release: MtM+ Technology partnered with leaders in the semiconductor industry launching their smart factory solution.

[Taipei, Taiwan, Nov 6th] MtM+ Technology has partnered with leaders in the semiconductor industry launching their first smart factory solution.  Many months of research with MtM+’s strategic partners identified many areas where smart technology can be effectively applied.  Customized DCS machines were designed and deployed at several factories where real-time valuable data were collected and analyzed.

The first area identified was semiconductor wafer storage.  In order to avoid oxidation, a constant flow of nitrogen is pumped into these storage cabinets to maintain constant temperature and humidity.  These cabinets were not constantly monitored and controlled leading to a high risk of wafer spoilage.  MtM+ installed custom DCS machines to monitor temperature and humidity and applied nitrogen accordingly.  This not only provided savings in nitrogen but implemented a disaster preventive monitoring system which is extremely valuable.

Electricity is one vital component in operating any factory.  Power outages cause downtime for manufacturing, resulting in heavy monetary losses.  The second area identified is power outage due to the overheating of supply circuit breakers.  When these breakers overheat, they will be triggered providing a temporary loss of power.  The factory’s existing solution to this problem is to have a worker to measure this with a thermometer gun and adjust the machine loading accordingly.  This is an extremely manual process and can fail often in the hot summer months.  MtM+ installed custom DCS machines to all circuit breakers at several factory locations to monitor its temperature.  Warning messages will be sent out to modify machine loading if it is above a certain threshold.  Since such preventive monitor system has been installed, no power outages related to overheating has been identified.

Over many months, these two systems were deployed and extremely valuable real-time data had been collected.  Nitrogen cost is cut by 40% and labor cost is cut by 45%.  While cost cutting is great, the most important are deployment of these real-time preventive monitor systems.  These avoided chances of wafer spoilage as well as power outages caused by power breakers overheating.

As the data generated by these real-time preventive monitor systems accumulate to big data, it provided great opportunity for analysis through algorithms with artificial intelligence (AI).  With the available technology, machine learning is possible providing deeper insights and predictions to future disaster prevention.  Installation of smart factory systems like MtM+’s DCS machines is only the beginning to the gateway of big data AI analysis.

If you would like more information about this topic, please email for details.

Press Release: MtM+ Technology launches Data Collection Station, a complete Smart Factory Solution.

[Taipei, Taiwan, Oct 3rd] Smart factory is the inevitable future of manufacturing.  MtM+ Technology is releasing two new products in the Smart Factory sector: Data Collection Station, DCSv1 and DCSv2.   Both products feature Bluetooth Low Power (BLE) technology (with options of Wifi and LoRa) armed with various sensors and controls tailored to the needs of each factory.

With MtM+’s Smart Factory system, it effectively provides a solution for Environmental Monitoring, Preventive Maintenance and Asset Management.  Valuable real-time data can be collected and analyzed for the purpose of both cost reduction and production down-time prevention.  Several machines that need to be serviced can be identified through Smart Factory systems and can be taken out at the same time ensuring smooth manufacturing operation.

As the number of DCS stations grows, a bottleneck is created in terms of data transmission causing huge data corruption.  Through research, it’s found that data collision result in a data loss of as much as 80%.  In order to recover this data, MtM+ has done extensive research and development in Edge Computer technology.   Smart algorithms are developed and tested to battle this issue.  This solution has been tested thoroughly and currently deployed in several companies in the Semiconductor, Petrochemical and CNC Manufacturing industries.

The deployment of these Smart Factory machines in these factories are proven valuable and a cost reduction of 76-83% has been identified.  Beside cost savings, the data collected provided an unseen insight to these operations in the areas of logistics, resource allocation and effective time management.  DCSv1 and DCSv2 are incredibly flexible, reliable and cost effective machines for any large scale smart factory solution.

If you would like more information about this topic, please email for details.

Enabling Smart Factory with Edge Computing

Smart Factory is the future in manufacturing.  Integration of smart technologies such as IoT, AI and machine learning in factory equipment allows for real time analysis and immediate reactive actions that can maximize output and minimize downtime.  In this article, we will explore what is Edge Computing and its importance to a smooth operation in a Smart Factory.

What is Bluetooth Mesh Networking?

With many sensors and IoT devices installed in the many factory equipment, these devices communicate with each other and the main server through a Bluetooth network.  Such a network is also referred to as a Bluetooth Mesh.  The size of this mesh can be tens, hundreds or even thousands of nodes.  More details of how such Bluetooth Mesh can be found here:

What is Edge Computing?

On the wiki, Edge Computing is defined as, “In one vision of this architecture, specifically for IOT devices, data comes in from the physical world via various sensors, and actions are taken to change physical state via various forms of output and actuators; by performing analytics and knowledge generation at the edge, communications bandwidth between systems under control and the central data center is reduced.”, so what does this mean?

It is best to illustrate edge computing via an example.  There are five temperature sensors setup around the house to monitor temperature change and each of these sensors sends its current temperature to the main server directly.  Without edge computing, if there are no changes in the temperature, all five sensors send the same temperature reading continuously to the main server.  As you can see, this is a waste of energy and causes collision (we will discuss this in subsequent sections).  With edge computing, an algorithm can be developed on each of the sensors.

It is designed so that each sensor won’t sent temperature information to the main server unless it’s has a change of at least 0.5 degrees.  This way, the sensors will only send “useful” data and won’t update main server data unless there is a big enough change.  This is the main philosophy of edge computing.

MtM+ Technology’s Edge Computing Research and Solution

MtM+ Technology has implemented Smart Factory solutions through its Data Collection Stations (DCS) (Details and specification outlined here:  DCS collects environmental data and communicates with other DCS units and the main server through a Bluetooth Mesh network.

MtM+ Technology partnered with a company in the Semiconductor Industry to implement a smart cabinet for silicon wafer storage.  Silicon wafers can oxide (rust) quickly with oxygen therefore must be stored in nitrogen cabinets.  Maintaining a proper level of nitrogen in these cabinets is proven a challenge and traditionally, nitrogen is just refilled regularly over time.  It is found in our research that the level of nitrogen in these cabinets has a strong relationship with temperature and humidity.  DCS machines are equipped with temperature and humidity sensors and will replenish nitrogen accordingly to changes in these two matrices.  Many units of these DCS machines were implemented in the many nitrogen cabinets and worked really well.  As more units were installed, problems arose.   Please see the following chart.

It is found that as the number of DCS machines increased, the percentage of data loss to the main server increased exponentially.  For example, if there are only five people talking to you at once, you are very likely to hear fully what they are talking to about.  Suddenly if there are twenty people talking to you at once, some of the voices will surely collide and you will miss some of the information.  This data collision  is precisely the problem and is the main cause of this data loss.  This data loss resulted in inaccurate temperature and humidity readings which interfered with the smart control of nitrogen replenishment to the wafer cabinets.

Looking at this issue, edge computing can fully resolve this.  An algorithm has been developed and implemented on each of the DCS units so that only “useful” information will be sent to the main server.  Referring to the chart below.

The black line represents humidity data measured in one DCS unit.  The red line shows humidity data received at the main server without edge computing while the blue line shows the same data with edge computing in place.   As can be seen in this plot, with edge computing, a very accurate representation of the real data is achieved (Pearson’s R of 0.9906).

Why Bluetooth and Edge Computing over Wifi?

Smart factory sensors and the communication interface with the main server can also be implemented using a Wifi network.  Unlike Bluetooth, a Wifi network is not limited by bandwidth so edge computing is not needed.  MtM+ Technology has done extensive research comparing the two technologies and found that Bluetooth implementation result in an average cost savings of 76-83% over Wifi.   Here are the findings.

Interface with the main server

Each Wifi sensor node connects to the main server through a wireless router (called Access Point or AP).  Each of these routers can connect up to 30 sensor nodes.   If there are 250 sensors, 9 routers will be needed.  For Bluetooth mesh connection to the main server, only one dongle is needed for up to 500 sensor nodes.  As the number of sensors in the network increase beyond 30, the need for addition routers for Wifi implementation increases cost dramatically.  This is before comparing the cost of a Wifi router over a Bluetooth dongle which is easily 8 times.

Network Infrastructure and physical size of sensor network

Each Wifi router in a Wifi network requires a physical wire (or fiber optics) to be connected to the main server and/or the internet.  A wireless repeater can be used but with each repeater, the network bandwidth will be cut in half.  As bandwidth decreases, it faces with issues like data loss.  A Bluetooth mesh sensor network, however, do not require a physical wire network.  As long as each Bluetooth sensor node is within 30 meters of each other, data can be transmitted to the main server through each of the nodes and the dongle.  For older factories, the cost to implement large scale physical wired networks will be extremely expensive.  Without many obstructions, each Wifi router has network coverage up to 300 squared meters.  For large factories, a large number of Wifi routers will be needed which makes it less feasible when compared to a Bluetooth mesh network.


Smart factory is the inevitable future of manufacturing.  Illustrated in our research, as the number of DCS units increased, the data loss to the main servers can be as much as 80%.  With the implementation of edge computing algorithms, very accurate representation of real data can be achieved.  The advantages of a Bluetooth mesh network over Wifi were also discussed and it was found that a cost savings of 76-83% was achieved.  It is concluded that a Bluetooth mesh network along with edge computing is proven to be a vital and cost effective part of any large scale smart factory solution.