MtConnect04S support Nordic nRFgo Studio. You can program MtConnect04S quickly by nRFgo. We will use a blinking LED application to show to how to program MtConnect04S.
MtConnect04S 包含 Nordic nRF51822、RGB LED。 下面介紹如何把MtConnect04S做為一個簡單的動作感測器。
There are the builtin RGB Led on MtConnect03. This tutorial will show how to to use the sensor data to build a simple application to detect vibration.
There are the builtin sensors of accelerometer and gyro on MtConnect03. This tutorial will show how to simply get the value from MtConnect03.
MtConnect03 包含 Nordic nRF51822、RGB led、加速度感應器及電子陀螺儀。接下來說明如何使用MtConnect03 當計步器使用。
The nRF51 DK board supports programming and debugging of external boards. To debug an external board, follow the instruction that extract from Nordic nRF51 Development Kit User Guide v1.0.
5.10 Debug output
The nRF51 DK board supports programming and debugging of external boards. To debug an external board, connect to the Debug out (P19) connector with a 10 pin cable.
When the external board is powered, the interface MCU will detect the supply voltage of the board and program/debug the target chip on external board instead of the on-board nRF51422.
Note: The voltage supported by external debugging/programming is 3.0 V.
The P20 also features a debug out connection in order to program shield mounted targets, as for the Debug out P19 header the Interface MCU will detect the supply voltage on the mounted shield and program/ debug the shield target.
If the Interface MCU detects target power on both P19 and P20 it will default to program/debug the target connected to P19
A blinking LED tutorial bring you to know how to use MtConnect04S development kit, Step by step, from hardware to software.